Your cart is empty.
M.2 (S80) 3SE4 SLC
M.2 (S80) 3SE4 SLC
- SATA III soultion for industrial field
- Innovative Firmware Algorithm
- DRAM-less, 100% data integrity
- Excellent random performance
- Wide Temperature: -40°C~85°C
- Supports TRIM/NCQ/SMART
- Built in iData Guard
- iSMART disk health monitoring
- Compatible with M.2 2242-D1-B-M
CALL FOR PRICE
Image for illustrative purposes only
Description
Innodisk M.2 (S80) 3SE4 is designed as the standard M.2 form factor with SATA
interface, and supports SATA III standard with excellent performance. The
form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding
of mechanical interference, Innodisk M.2 (S80) 3SE4 absolutely replaces the traditional
hard disk and makes personal computer, in any field, smaller and easier.
Innodisk M.2 (S80) 3SE4 effectively reduces the booting time of operation system and
the power consumption is less than hard disk drive (HDD), and complies with ATA
protocol, no additional drives are required, and can be configured as a boot device or
data storage device.
Specification
| Supply Voltage | 1.6W (3.3V x 500 mA) |
|---|---|
| Anti-Shock operation | 1500G @ 0.5ms |
| Anti-Vibration | 20G @7~2000Hz |
| Capacity | 8GB~64GB |
| Interface | SATA III |
| NAND Type | SLC |
| Sequential Read/Write (Max) | 520/360 MB/Sec |
| Operating Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
| Dimensions (in mm) | 22.0 X 80.0 X 3.5 mm |
Protocols
| Primary | Secondary |
|---|
Accessories
| Product Name | Brief Description |
|---|
Downloads
- M.2 (S80) 3SE4
Product Datasheet - Innodisk 2024 Selection Guide
Flash Storage, DRAM Modules and Embedded Peripherals